今天小編給大家?guī)�來的是一位玩家分享的《最終幻想零式HD》修改自由時間方法，不知道怎么修改自由時間的玩家，快跟小編一起來看看吧！

首先需要下載CE：點擊進入

If that's true then "fftype0hd.exe+6D0EC0"/"7FF632880EC0" is the "Time to Mission" address.

Hours go like this -

(Was up to 1day 12hours but I skipped over 1d12h and 1d10h and accidentally saved on top of them)

1day 8hours - 131076

1day 6hours - 262150

1day 4hours- 393224

1day 2hours - 524298

12hours - 1441816

10hours - 1572890

8hours - 1703964

6hours - 1835038

4hours - 1966112

2hours - 2097186

Mission Day - 2228224

They're divided by 131074 in between each 12 hours.

There's a possibility that the address isn't fixed, which I highly doubt since all lazy ports tend to have them fixed.

If the address turns out to be blank or some of the numbers aren't the same then you can easily find it by looking for:

"Unknown Initial Value" and going "Increased Value" or "Increased Value By 131074" each time you skip 2 hours.

以上可以看到各個時間的數值（每過2個小時+131074）

也提示了大家，地址（數值）是會變化的（我的就是這樣）

拿我自己的比喻：

時間是離任務時間還剩4小時

1.先用CE搜索   Unknown Initial Value （未知的初始數值）

2.再用掉2個小時，剩2個小時，再用CE搜索  增加的數值131074 ，會出現很多數值

3.載入存檔（因?yàn)榈刂愤�很多，可我剩下2個小時）回到剩下4個小時的存檔

4.再用CE搜索減少的數值，就看見只有一個地址（記下數值）

5.先不要修改，跑去再用掉2個小時（剩下2個小時）

6.看到了數值變動了，試著把數值改回剛剛的數值

7.切換地點，看下時間是否回到4個小時，如果有變回4個小時，就代表你成功了

本人試了，修改完后再去用掉2個小時（4個小時->2個小時）

變成了2個小時，所以是有效果的，只是修改麻煩點……